Let Go And Let God UV DTF Wrap

**PLEASE READ**

This listing is for a single sided UV DTF cup wrap transfer for 16oz cups only. Cup not included.

- UVDTF wraps are measured and cut for 16oz Libbey glass cans.
**Please note: not all manufacturers glass cans are the same

- Printed image is approximately 9.3"x4"
- Premium printed UVDTF wrap
- Permanent and scratch proof
- Durability with strong adhesive
- Waterproof (do not soak)
** HANDWASH ONLY, no dishwasher

*If you have never applied UV DTF wraps before, we recommend watching YouTube videos of the application process before starting. (My favorite wrap application is the hinge method)

**How to apply:
• Clean & dry the surface so it is free from any dust or hand oils
• Pre-measure the wrap and cup prior to applying
• Peel the transparent film carrier from the backing.
• Place the transfer on the product, pushing out any air bubbles as you wrap ensure your design is straight & positioned correctly. You will not be able to adjust it!

** WARNING: Once the wrap is on the product, it is almost impossible to remove. Do not try to lift it back up, it will damage the design. If you damage the wrap during application, we will not be responsible to replace it.

• Apply pressure to the printed design until your transfer applies in its entirety. DO NOT OVERLAP
• Carefully peel back the carrier (top) film off your product; it is important to do this very slowly as you want to make sure the design transfers correctly

* Allow to dry and set up for 24 to 48 hours, and then you can gently wash off any glue residue.

* Handwash only, do not soak, no dishwasher. Not microwave safe.

* We are NOT responsible for Wraps that are applied incorrectly or damaged during application. We are not responsible for wear and tear on the wrap over time. That includes fading, chipping, tearing, or peeling.

**CUP NOT INCLUDED

SIZING NOTE -
*The sizing of the cup wrap is mentioned in the description. Depending on the glass cup, there might be a slight overlap or a small gap between the decal edges. Please be aware of this when applying

*These decals are specifically designed for 16oz Libbey Can Glass. While you may use them on other surfaces, any issues arising from the use of decals on non-specified surfaces are at your own risk. Refunds or replacements will not be offered for such cases.


** If you purchase this decal from us and create cups, you are welcome to sell them as your own product. However, please note re-selling the decal as a standalone item is not allowed

Returns/Exchanges:

-All of our products are custom printed just for you so unfortunately, we are unable to accept returns or exchanges.

SHIPPING

-Orders are shipped as quickly as possible typically between 2 to 7 business days (this does not include the ship time)
**Please make sure that you have entered the correct address. We are not responsible for returned items.
**Arrival of the order will vary depending on shipping method chosen by buyer
**Once your item has been shipped, we are not responsible for carrier shipping times or delays.
**We are not responsible for lost or stolen items after they are shipped.


Thank you for your order and please feel free to contact us with any questions you may have.

*No decorative accessories pictured are included, only the wrap. Cup NOT included